- Newest Waterproof Submersible LED Lights: Submersible LED lights are 100% Ture IP68 WaterProof, major point is our double sealing ring protects the light on the outside so it will protect the inside better from getting damp and moldy. We have 4 suction cups, We also have 1* 5000 Gauss Magnet to increase even more suction. The 4 suction cups are made out of silica gel which makes our product much more durable. Works well in both Wet or Dry Places.
- Battery and RF Remote: Super bright led submersible powered by 3 x AA batteries (20-120 Hours Battery Operated LifeSpan). There are Dynamic Modes and Timer Modes of the RF Remote. (Note: The pool water will absorb some signals. The suitable distance range we recommend is 6.6-100ft.
- 16 Static Colors, Timer Mode, and Dynamic Mode: TUiREL 16 colors submersible led pool lights to have unique color-changing beads which will enhance the brightness at a significant level when compared to other submersible lights and enchanting lighting effect to their surroundings.
- Where to Use: The shell of the pool lights for the inground pool is very falt and smooth which will reflect the light perfectly. The scaly side edge makes the submersible light itself be adornment. it will create a more romantic atmosphere wherever you need it, such as Pond, Fish tank, Trailer Lights, Waterfall, Hot Tub, Hallway, Garage, Wedding, Event, Party as Decor Lighter Night Light Indoor and Outdoor Decoration.
16 RGB Color-Changing Available: increase to 16 fancy static colors to choose from the remote controller, they are fully dimmable, which means you can program the brightness level of the light to whatever level you require so that you could program and vary all of the settings from afar.
Good to know before using our led pool lights :
- Please make sure the sealing ring is undamaged and properly stays in the groove.
- Please twist the light until it can not be twisted any further, to make it fully waterproof before putting underwater. ( Very Important!!! otherwise, it will leak)
- Please dry the lights first before replacing batteries. Because the water outside lights may drop into lights and keep inside the battery case, it will damage the components, and defeat the lights. ( Very Important!!!)
- Please keep the remote dry from water, because it’s not waterproof, water will make it stop working.
- Please don’t use a bad quality battery, it will influence the brightness of the light and the working life, and it will harm the light bulb too.
- For long-time use, we recommend using a rechargeable battery to save batteries and money, recommend the brand "Energizer" or "Eneloop", and don’t use the brand "Tenergy".
- Because some rechargeable batteries are a little bit big to insert into the battery case, so it doesn't connect properly, the light will not light up. If the lights don't light up once you insert all 3 batteries, please move the battery to make them connect properly.
- We don’t suggest using a carbon core battery, because it's lightweight, and will make the lights float.
For Remote Control
- Please keep the remote dry from water, because it’s not waterproof.
- Please long-press the button "ON" on the remote for about 2 seconds to activate all the lights. After turning it on, no need to long-press, the light will be very sensitive to react to what you set. ( very important!!!)
- For underwater use, please keep the remote within 10FT/3M-16.4FT/5M, because water will largely absorb the signal, and weaken the signal to the lights.
- In the air, the remote range can reach 164FT/50M and more.
- We have already improved the signal system, it has further remote range and better reaction which can work for 16.4FT/5M and more underwater.
For Suction Cups (2nd generation)
- Can be used in both air and underwater on flat and smooth surfaces. (not rough surface)
- Please clean the surface before attaching, make sure there is not any stuff between the surface and suction cup, especially remember to remove the lubricant like shower cream, moss, etc. ( very Important!!!)
- We already enlarged the suction cup to a larger size and tighter absorptivity, it's competent to hold lights under 10-16.4ft/3-5m underwater.
- It’s perfect for any iron place which can be attracted by a magnet, especially a rough vertical surface, but not for a smooth vertical surface, please use a suction cup instead.
- The magnet is strong, but it's better to apply it on a pure iron surface, alloy may reduce the absorb effect.